The  PIS-2000 is a active POE injector with internal power to minimize bulky power line and AC outlet management while installing your network. The product integrates with the original network to deliver power and data to a remote POE device over nothing more than an existing standard Ethernet cable.

    In order to provide a highly reliable solution, PIS-2000 has surge protection to shut off the power supply if an excessive current or a short circuit is detected. With the PnP function, this device is easy to use just by simply connecting to the power and to the network cable. The system is then ready to go. Furthermore, the compact design makes it an easy fit for a desk or any limited space.

    Combing the PIS-2000 and PDS-2105/2112, you can create a very low cost and long distance PoE network between non PoE switch and non PoE IP camera, phone.

1. Features:      

1.1 LED indicators power and PoE on.    

1.2 Distance up to 100 meters    

1.3 “Carrier class” power over Ethernet system    

1.4 Quick, easy simple plug-and-play installation    

1.5  Auto ranging power supply/inserter

2. General Specifications:      

2.1 Standard: 802.3af/at compliant Power Over Ethernet    

2.2 Dimension: 145mm (L) X 60mm(W) X 40mm (H)     

2.3 Operation Temperature:  0°C ~ + 45°C    

2.4 Storage Temperature: -20°C ~ + 70°C    

2.5 Humidity: 10% to 90% Non-Condensing    

2.6 Output Pin Assignment: Pin 12 & 36    

2.7 Power: PIS-2000 48VDC 0.320A 15.4W power adaptor

3. Data / Power Input :      

3.1 Input Data Port: Cat5e 8P8C RJ-45 jack.    

3.2 Input Data Source From: 802.3compliant 10/100/1000BaseT Ethernet .     

3.3 Input Power: 100V-240VAC 500mA Max.    

3.4 Input Power Port: DC jack 2.5mm

4. Output :      

4.1 Output PoE Port: Cat5e 8P8C RJ-45 jack.    

4.2 Output Voltage Rate:  48VDC    

4.3 Output Voltage Accuracy: ± 2% Max.    

4.4 Output Max. Current: 320mA. 

PoE single port injector