Epoxy Putty Stick
Components:
AquaMend Underwater Repair Epoxy Putty StickFastSteel Steel-reinforced epoxy putty stickInstaCrete Concrete Repair Epoxy Putty Stick QuikAluminum Aluminum-Reinforced Epoxy Putty Stick QuikCopper Epoxy Putty StickQuikPlastic Plastic Repair Epoxy Putty StickQuikTitanium QuikWood Wood Repair Epoxy Putty StickRepairitQuik Multi-Purpose Epoxy Putty Repair Stick
How To Use:
Before applying, roughen and clean the area to be repaired.
Then follow these easy steps.
1. Cut or twist off required amount.
2. Mix by kneading with fingers to a uniform color. If mixing is
difficult, warm QuikAluminum to room temperature or slightly
above.
3. Apply to surface to be repaired within 2 minutes of mixing.
Force into any cracks or holes and strike off excess material,
preferably with a tool moistened with clean water.
When applying to a damp, wet or slowly leaking area, work
the mixed material forcefully into the surface and apply pressure
until adhesion begins to take effect.
For best results: Use damp fingers for easier mixing, application,
and a smooth appearance of the cured compound. Remove
excess material before hardening begins.
Curing: QuikAluminum has a 5- to 7-minute work life. Functional
cure occurs in 60 minutes.
Epoxy Putty Stick