Ads by Google
REAL6410 core board and backplane using the combination of design, user-friendly core board used independently.
REAL6410 core board and backplane using the combination of design, user-friendly core board used independently. In order to reliably connect with the floor, the core board with 170 square feet stamp bottom hole connected. features of the core board is as follows 1 in 8 laminate designs, including two blind holes, hole buried layer; 2, size is only 6 * 6cm; 3, Single-supply 3.7-6.5V; The S3C6410 processor, 4,800 MHz; 5,256 MByte of MoblieDDR, 266MHz system bus; 6,1 GB of NandFlash, and support to upgrade to 8GB; 7, iNAND Flash, maximum support to the 8G; (remaining separate welding position) 8, WM9713 audio output, support for two output, two-way entry. And support the TOUCH function. Phone support and the composition of GSM call connection mode; 9,100 M LAN integration; 10,170 pins, leads the CPU features available. See pin definition; 11, provides two packages QFP170 and DIP200 core board.
Bottom features are as follows: 1, USB HOST interfaces; 2, USB Device Interface 3 way 232, 3-way TTL serial port; 4,100 M network interface 6, TV and CVBS output interface; 7, SD card interface 8, RTC rechargeable battery; 9,5 V power input 10,10 keys, the layout of the phone; 11, reset button all the way 12, Two LED lights, LED lights the way directed; 13, Camera Interface 14, headphone jack, 1.5W speaker interfaces; 15, IIC ADC SPI Interface 16,10-bit code switch BOOT Stubbs; 17, SIM300 GPRS module interface 18, SIRFIII GPS module interface (including the antenna interface);
19, Hayward WIFI module interface 20,50 PIN LCD interface, the development board comes standard with 4.3 "belt TOUCH LCD, and with 7-inch LCD optional.
Packing included
5 V/2A switching power supply miniUSB line cross-line of a serial lines 1 a development board (with 4.3 "LCD) supporting a number of CD-ROM
Real6410 development board + 4.3 inch touch LCD Andriod-2.0 ARM11 Development Board 6410