Welcome to ECVERY
Environmental and Low carbon plastic slab for column and wall formwork
Environmental and Low carbon plastic slab for column and wall formwork
Supplier Info
[China Supplier]
Contact Person : Mr. Li Bing
Tel : 86-371-65982080
Fax : 86-371-69086855
Product Detail
1. With the thick of 15mm formwork 2. PVC plastic slab formwork 3. Environmental slab for wall

 Plastic  slab formwork  maily made with PVC, with good strength and load, can be used for 30 times, can totally instead of wood and steel formwork, a new enviromental, low-carbon and recycle used formwork!

1. Products Name

Concrete formwork

2. Specification

All size can be available.

3. Using

Widely using into construction.

4. Certificate

ISO9001:2000 Approved

5. Features

1. Energy saving, environment protection, cycle use

2. Resist compression, smooth and even surface

3.  Size transformed

6. Performance  characteristics

1. SAVE 30% man-hours & 50% amortized cost.

2. Easy to installation

3. Fine Brightness and Smoothness

7. Construction requirements

1. Set the formwork base position.

2. When installation the formwork, the same level of fastener should be on the same level.

3. Wall formwork and bolt hole should be relatively straight.

4. Situ concrete beams on the roof, board, when the span is more than 4m, the formwork should be in accordance with the design requirement, when the design is no specific requirement, and the bagging height should be one-thousand to three- thousands.

5. If the structure surface is irregular or an existing formwork can be figured module.

8. Resist compression

≥ 5000kgs weight per square metre

9. Resist temperature

-20°C- 60°C

10. Payment term

T/T 30%deposite 70% before shipment or L/C at sight

11. Packing

Shrink film or cartons

12. Productivity

60000 square meter/month

13. Unite price/payment

FOB Shanghai or QingDao

14. Origin

China

15.  Min-order

20 square metre

16. Material

PVC

 

Advantages of this formwork

1.  Press burden: this formwork is made of PVC rigid plastic and macromolecule materials to enhence its strength. It can bear 5000kgs load per square metres. Thus it can completely replace wood template and square timber (concrete formwork = wood template +square timber) and suitable to be used in various construction project.

 

2. Temperature range: this formwork can be operated in -20 Celsius to 60 Celsius which will not deformed.

 

3. Flat and smooth. The formwork will separate easily from concrete when it is concreted without mold release. Two pieces of template can be jointed well, flatness and smoothness of concrete surface reaches requirement for exposited concrete template.

 

4. Recycled: With more than 40 times of turnover and 10 years life, used and broken formwork can be recycled and be replaced for 30% new template or can be reprocessed by us who will only charge you processing fees.

 

5.Type can be changed. With rigor structure, concrete formwork is suitable to be used in various types of cross beam, column, and cast-in-place floor and shear wall. Its size can be changed freely.

 

 

 

Environmental and Low carbon plastic slab for column and wall formwork

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.