TA-CW/A SERIES INDUSTRIAL WATER CHILLER
TA-CW/A series industrial chillers are widely used in plastic industry, food , ultrsonic machine dying and plating industry.These quality, newly designed and easy operated chillers can accurately control various moulds' temperature, accelerate product-molding and decrease precessing cycle.
Features:
1.The compressor is use DAIKIN from Japan and the water pump is using Italy, special quite,saving electricity.
2.Exact electronic temperature controller precisely controls the mould temperature from +5°C to +30°C with the deviation of only ±1°C .
3.Stainless steel unit frame and open water-tank are firm,durable and easy to maintain and clean.
4.Timer for auto start and stop.
5.Imported brass tube and refrigerant offer a perfect refrigeration.
6.Apply the scope extensive,control the range of temperature is from 5°C to 99°C .(Cool and hot mould temperature controller)
Safety Devices:
1.Safely designed main power switch can switch the unit off in emergency.
2.Chained control circuit.
3.Equipped with phase-sequence protective device, short circuit protective device,over-current protective device,freezing protective device,Hi-Lo pressure switch,water-flow switch,electronic time relay and etc.
4.While the unit detecting any abnormality automatically,the indicator light will turn on and give an alarm.
Model TA-CA20
Chilling capacity power ( KW) 59.6
Chilling capacity ( KCal/hr) 51,256
Compressor Power( KW) 3.75*4
Compressor (HP) 5*4
Water Pump Power( KW) 1.5
Water Pump Flow( HP) 2
Water Pump Flow( L/min) 200
External Dimension L*W*H (mm)1900*1040*1870
Tank Capacity ( L) 320
N. W.(KG) 860
Pipe system diameter refrigerant water outlet/inlet 2"
Pipe system diameter Cooling water outlet/inlet --
TA-CW/A SERIES INDUSTRIAL AIR COOLED WATER CHILLER