WSM-500 PLASTIC GRINDER MILL 1.save energy consumption 2.reduce dust pollution 3.high efficiency 4.high output

WSM-500 Plastic Grinder Mill

 

 

    this machine is one kind of new plastic grinder mill based on the fourth generation ginder mill after improvement. the apparence is similar to the fourth-generation grinder mill.

 

    the gate lid can open is advantage for inspection and maintenance. adopt the wind and water of SMP together cooling. can directly cooling to the material, the bit and toothed rack. but this machine is the strong wind cooling, can reducing temperature inner of machine. this is remarkably advantageous to grind the thermal sensitivity plastic. amongst the blade High-speed rotating airflow, due to centrifugal force the material was throw to the tooth plate and crush between blade and tooth plate. powder with the qir discharge and the powder close to tooth plate that can not discharge will continue to crush till the powder discharge with the wind.

 

 

number of cutter	One piece, outer diameter: 480-500mm
Toothed plate	One set(excellent steel carburizing and quenching, hardness HRC60°)
Blade	24 pieces(excellent steel carburizing and quenching ,hardness HRC60°)
spindle speed	3800r/min
Power of motor	37kw with triangle belt, SPA Perimeter1900-2000mm
Draught fan	With motor of 2.2kw
output	PVC40-60 eyes 150-250kg/h
Dimension	(Length ×width × height) 3000×1000×2300mm

WSM-500 PLASTIC GRINDER MILL