01.

Lifting Conveyer

Working Length: 4500mm

Light Rubber Conveying Belt: 600mm wide

Conveying Speed: 8-15m/min

Motor: 1.5kw

02.

PC 800 Crusher (with water)

Motor: 37kw

Feeding Mouth: 800×540mm

Diameter of rotor: 540mm

Speed of rotor: 500rpm

Rotator: 8pcs      material: 9CrSi

Stator: 4pcs       material: 9CrSi

There is over-load emergency switch.

Cutting Chamber: The cutting chambers are entirely made of high hardness steel fine ground before assembly. Long life is ensured by the use of heavy wall thickness and high grade materials that will not contaminate the material being ground. The design allows for easy disassembly, repair, and maintenance.

Knives: Knife with "V"-type cutting, even cutting material, reducing energy consumption, reduce noise, the knife is very convenient loading and unloading. The knives are manufactured form high 9CrSi for high strength, maximum breakage resistancd, and durability. The design for easy replacement.

Rotor: Rotors are made of the finest material (40Cr) for toughness and carefully balanced for stable running. The "V" shaped rotor knives are easy to change and produce a consistent particle size.

Drive Pulley: The pulleys are fitted to the rotor shaft with taper lock bushings for maximum security. The inertia effect of the massive pulley assures steady,reliable operation while the taper lock mounting provides ease of maintenance.

Screen: The long life screens are either machined from high Strength material or formed from high grade plate as required.Many different hole sizes are offered and easy change allow you to tailor the machine to your needs.

03.

Film Friction Washing Machine

Motor: 11kw

Screw: Dia300mm

Diameter of mesh: 3mm

Screw Rotating Speed: 900rpm

Length: 3000mm

This machine has the self dirt-draining function.

Working Principle: With the high speed rotating screw, the sand and soil dirt could be separated.

The parts contacted the raw material are made of stainless steel.

04.

Deposit and Float Washing Machine

Washing Roller Motor I: 0.55kw

Washing Roller Motor II: 0.55kw

Dirt Collecting Motor: 1.5kw

Dirt Draining Motor: 1.5kw

Driving method: chain with speed reducer

Length: 4.5m

Width: 1m

Height: 1.76m

Function: It has the dirt collecting device can drain the dirt deposit at the bottom of the washing tank. There are one pull forks and three pull drum, which are rotating slowly, before the material was send to the dewatering machine, the dirty and soil was clean up absolutely. And the dirty and soil was deposit at the bottom, there is a screw pull them to the discharge port, then discharge them out.

The parts contacted the raw material are made of stainless steel.

05.

Screw Feeder

Motor power: 1.5kw

Diameter: 250mm

Effective Length: 3000mm

Function: Connected with deposit and float flume, when the

material after Washing, all of material was drop into the screw feeder, and then with the feeder helical rotating, the material was send to dewatering machine.

The parts contacted the raw material are made of stainless steel.

06.

Film Dewatering Machine

Motor: 22kw

Rotating Speed: 1270rpm

Diameter of rotor:700mm

Effective length of rotor: 1300mm

Diameter of mesh: 3mm

The parts contacted the raw material are made of stainless steel.

07.

Pipe Drying System

Heating Power: 45kw

Blower Motor: 7.5kw

The pipes diameter is 159mm.

Function: The pipe was made of stainless steel; its shape is “U” flexible, as the material out of dewatering machine, there is one blowers, and a heating box, as the heat box generate heat, the blower blowing, so the material was heat and it’s water content was removal, meanwhile material was blew to the storage hopper.

The parts contacted the raw material are made of stainless steel.

08.

Cyclone Hopper

Volume: 0.5m³

Diameter: 600mm

Height: 1000mm

The parts contacted the raw material are made of stainless steel.

09.

Control Panel

SIEMENS AC contactor

RKC Intelligent Temperature Control Instrument Digital Display

The working state of every part of the machinery will be show on the panel.

There is emergency stop switch on the panel.

11.

Remark

Installed Power: 84.6kw

Installed thermal air heater: 45kw

Production Line Dimension(L*W*H): 20000*4000*3500mm