Fluorinated Ethylene Propylene resin is the copolymer of TFE and HFP, with good thermal stability,outstanding chemical inertness

Item	unit	DS618-A	DS618-B	DS618-C	DS618-D
Appearance		Translucent particle,with impurities such as metal debris and sand,containing visible black particles percentage point less than 2%	Translucent particle,with impurities such as metal debris and sand,containing visible black particles percentage point less than 2%	Translucent particle,with impurities such as metal debris and sand,containing visible black particles percentage point less than 2%	Translucent particle,with impurities such as metal debris and sand,containing visible black particles percentage point less than 2%
Melting Index	g/10min	16.1-20	20.1-24	24.1-28	12.1-16
Tensile Strength,≥	Mpa	20	18	16	20
Elongation at break,≥	%	300	270	250	300
Relative Gravity		2.14~2.17	2.14~2.17	2.14~2.17	2.14~2.17
Melting Point	°C	265±10	265±10	265±10	265±10
Dielectric Constant(106HZ),≤		2.15	2.15	2.15	2.15
Dissipation Factor(106HZ),≤		7.0×10-4	7.0×10-4	7.0×10-4	7.0×10-4
Volatile,≤	%	0.1	0.1	0.1	0.1

Main applications:

Mainly for aviation and aerospace industry,the MTR transport vehicles,automatic switching equipment,well test equipment,flame alarm systems,high-rise buildings,fire regional wires,cables,computers,communication networks,electrical fields,particularly applicable for high-speed extrusion small-caliber wire insulation material.it is more economical when used in where no high stress cracking resistance is required.

FEP resin/FEP Copolymer for High-Speed Extrusion DS618