Universal SMPS Power Board for 26"-32" and some 37" LCD TVInput voltage range: 90-264VACOutput: 24V,12V,5VDC,5VSB
Input Electrical Characteristics:
Input voltage range | 90VAC to 264VAC |
Normal voltage range | 100VAC to 240VAC |
Frequency range | 50Hz/60Hz±5% |
Max input ac current | 3.0Amax at full load condition |
Inrush current (cold start) | 50Atyp peak, 120Vac; 100Atyp peak, 220Vac |
Efficiency(full load) | 83%min at 100Vac; 86%min at 220Vac |
Harmonic current | Meet EN60065-2002/IEC61000-3-2 class D |
Leakage Current | Less Than 0.5mA, 230Vac input |
Standby Power Loss | <=1W 240Vac input ,Output current≤50mA, |
Input Fuse | T5A/250VAC |
Output Electrical Characteristics:
Output Voltage | Regulation | Min. current | Load current range | Peak current or power |
+V1(+24V) | +V1±5% | 0.2 A | 0.2A-6A | <=160W |
+V2(+12V) | +V2±5% | 0.3 A | 0.3A-3A | <=160W |
+5.0V | +5.0V±5% | 0.1 A | 0.1A-3A | <=20W |
+5.0V(STB) | +5.0V±5% | 0.05 A | 0.1A-1A | <=20W |
Note:* The peak current or power should be test at other of dc output at Ratedload, And the peak current pulse width within 100ms.
DC Output Ripple & Noise:
Output Voltage | Ripple & Noise (Max.) | ||
+V1(+24V) | 240mVp-p at 25C | 350mVp-p at -10C | |
+V2(+12V) | 120mVp-p at 25C | 200mVp-p at -10C | |
+5.0V | 50mVp-p at 25C | 200mVp-p at -10C | |
+5.0V(STB) | 60mVp-p at 25C | 200mVp-p at -10C | 150mVpp when STB |
1) Measurements shall be made with an oscilloscope with 20MHz bandwidth.2) Outputs shall be bypassed at the connector with a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor to simulate system loading.
Mounting:
Pin-CON1 Connection And FunctionNO. Pin Connection Function1. AC-L AC INPUT LINE2. NC NC3. AC-N AC INPUT NUTURE
Universal Power Supply Board for 26"-32", 37" LCD TV