ATTACH Reach across the front of the cutout and attach Loadbuster's anchor to the attachment hook o

Loadbuster, Load Break Tool:

ATTACHReach across the front of the cutout and attach Loadbuster's anchor to the attachment hook on the far side of the cutout,and then engage its pull ring with Loadbuster's pull-ring hook.Loadbuster's pull-ring latch prevents inadvertent disengagement of the cutout pull ring and Loadbuster's pulling hook. PULLA firm,steady downward pull on Loadbuster-to its maximum extended length-opens thecutout in the normal manner as the current is diverted through Loadbuster.At apredetermined point in the opening stroke,Loadbuster trips,breaking the circuitpositively. REMOVELoadbuster is disengaged by first removing its anchor from the cutout attachmenthook.Then, with the blade in the open position,Loadbuster is removed from the pull ring with a simple "roll-off"motion.

Model	Total Length	sections	withstandvoltage
JT-1104K	4M	3*1.5M	10KV
JT-1145K	4.5M	3*1.5M	35KV
JT-1106K	6M	4*1.5M	35KV
JT-1175K	7.5M	4*1.9M	110KV
JT-1109K	9.5M	4*2.4M	110KV
JT-1112K	10.5M	4*2.7M	110KV

Loadbuster, Load Break Tool