Hydrostatic pressure testing machine 1.Pressure:0-100MPa 2.Conform to ISO9080,ISO1167,ASTM D1598 3. Pressure accuracy:-1%~+2%

    Hydrostatic inner pressure tester is mainly used to determine of the resistance of thermoplastics pipes to constant internal water pressure at constant temperature. It conforms to ISO 1167. It is mainly used in testing the short-time hydraulic failure and resistance to constant internal pressure of the plastic pipes for the transport of fluids.

1. Application

a. Determine the resistance to internal pressure of thermoplastics pipes 

b. Determine short-time 

hydraulic burst to constant internal water pressure at constant temperature

2. Equipment configuration

a. Main frame for set parameter, display time for every test piece

b. Water tank for arrange the test temperature

c. End cap from 10 to 2000mm and can be ordered for more than 2000mm

3. Conformation to the standards

ISO9080, ISO1167, 

ASTM D1598, ASTM F1335, 

CJ/T108-1999

4. Features

a. Microprocessor controlled, liquid crystal screen display

b. Record, display and print the real-time technical data of each station automatically

c. Make several pressure-resistance tests for the different pressure at the same time,independent from each other,without interaction

d. Recovering the test manually or automatically after sudden interruption 

5. Parameters

Pressurized range	≤10MPa ( beyond 10MPa can be ordered )
Constant pressure accuracy	+2%,-1%
Timing range	1min~10000h
Timing accuracy	less than 0.1%
Test pieces	3(standard)-100
Power supply	220v±10%
Temp Range	Room-temp.~95°C or 18°C~95°C
Power

Hydrostatic pressure tester