Ads by Google
Features:
Good support for corrections in the cylinder circumference of forme-cylinder and blanket-cylinder Changing the printing lengthPolyester film with adhesive light (silicon coating) on one sidePaper jam-resistant, crease-resistantSelf-healing and repositionalbleUniform thickness and hardnessThickness:
0.04mm | 0.08mm | 0.10mm | 0.12mm | 0.14mm | 0.16mm |
0.18mm | 0.20mm | 0.23mm | 0.25mm | 0.28mm | 0.30mm |
0.35mm | 0.40mm | 0.45mm | 0.50mm | 0.55mm | 0.60mm |
Application:
Cleaning the cylinders totally with a wet sponge and washing like alcoholIf cylinders have a corrosive surface, there could be space where solvents can flow beneath the underlay foil. In this case the adhesion of the foil over a long time can't be guaranteed.Putting the sticky side of the foil to the lead edge of the cylinder in a parallel way and pressing it down softlyRemoving and repsitioning the foil to correct place because of the low adhesive at the beginning of contactSmoothing out with a dry, fluffy-free cloth from the middle to bothe sidesSpecial micro groove structure of the adhesive will help to transfer the air bubbles to the sides and will disappear after a few rotations of the cylinder.Removing the foil slowly diagonally flat to the bottom while the cylinder is still warm after 8-10 months of useAfter longer period of use the adhesion increases and the remove will be very hard.[agent] folex Underpacking Foils Folabase H-45 (Swiss)