HDMI TO Composite/Svideo +Audio Converter SE-381A
This converter takes an HDMI input signal at the rated resolutions and converts it to a standard definition Composite or S-Video signal. Properly sized to view optimally on your display. This device supports both NTSC and PAL video standards. This provides an excellent option when dealing with HD content that needs to be displayed on a standard definition display.
Features
1. The HDMI To Composite/S-Video converts HDTV input resolutions of 480i@60Hz,480p@60Hz,576i@50Hz,576p@50Hz,720p@50/60Hz,1080i@50/60Hz,1080p@50/60Hz 2. Supported PC input resolutions include 800x600@60Hz,1024x768@60Hz, 1280x720@60Hz, and 1920x1080@60Hz 3. Auto detect signal source, supports OSD (On Screen Display), OSD information display on TV : IN 1920*1080P 60 OUT NTSC If no signal .it will display as below IN No Signal OUT PAL or NTSC 4. Supports S-Video/Composite Video output simultaneously5. Supports both NTSC and PAL formats6. Output NTSC Resolution: 480i(60Hz)7. Output PAL Resolution: 576i(50Hz)8. This converter can be used with both the APPLE TV2 and APPLE TV3 with HDMI outputs .9. Use it with a PC or laptop with HDMI output to a TV with only Composite / S-Video inputs10. Attach a video conferencing unit with HDMI outputs to a DVR or TV with Composite / S-Video inputs Stream & watch audio & video from the internet and record simultaneously
Connection Image Interface SpecificationOutput:
1. Stereo Analog Audio Output
2 RCA stereo analog audio outputs. Connects to the display or a audio Receiver.
2. Composite Analog Video Output
RCA composite video output. Connect to a composite input on a television.
3. S-Video Analog Video Output
S-Video video output. Connect to a s-video input on a television.
Input:
4. 5V DC Power Supply Input
Connect the included 5V DC power supply to this input.
5. Power LED
This LED will become active once the included power supply is properly connected.
6. HDMI Input
Connect the HDMI source to this input connector. This will accept both video and audio through the HDMI connector.
7. PAL/NTSC
PAL/NTSC Switch
Accessories & PackageInput Sync Signal | 5V p-p (TTL) |
A/V Input | HDMI Type A, 19-pin female |
Video Outputs | Composite RCA / S-Video |
Audio Outputs | L/R RCA analog audio |
Power Consumption | 2.5Watts (min)7.5 Watts (max) |
Output Video Impedance | 75 ohms |
Power Supply | D/C 5V/2A |
Relative Humidity | 20%~90% |
Dimensions | 128x 89 x 26mm |
Weight | g |
Installation steps:
Simply connect your HDMI video source to the HDMI input jack of the HDMI to Composite converter. Connect your Composite or S-Video display cable to the correct video output jack Ensure that the proper video output format is set using the NTSC/PAL format switch on the rear panel of the unit. Please consult your television’s manual for the proper input format type. Power on all connected components. You will then have HDMI video playing on your Composite or S-Video display with simultaneous audio out.HDMI to Composite/S-Video audio Converter SE-381A