Air source heat pump for house heating 1. --25DC Low temp.use 2. cooling and heating design 3. R410A, 60DC 4. CE approved

ENERGY SAVING AIR SOURCE HEAT PUMP

Working Principle

Heat pump is a promising technology that used the same mechanical principles as refrigerators and air conditions to generate hot water.

The heat pump works by extracting heat from the surrounding air/water/soil and using it to heat low pressure liquid refrigerant in the heat pumps evaporator, vaporizing the liquid. The refrigerant then passes through the compressor, which raises the refrigerant pressure and thus the temperature as well. The heated refrigerant gas passed through the heat pump condenser, where is gives off its heat to the water and condenses back into the liquid state. The liquid refrigerant then passed through an expansion valve or capillary where the pressure is reduced and the cycle starts over.

  

Advantage

  

Energy Saving    Compared to conventional heated equipments such as electricity resistance heater, gas/oil boiler and solar heater, a heat pump operates as a cost as little as 25%

Environment Friendly    A heat pump will not release harmful materials into the nature.  Also using heat pump as a heating solution will greatly reduce the emission of carbon dioxide.

Wide Range of Applications

Heat pump is an optimal house heating and domestic hot water heating solution in residential and a variety of commercial applications. It is also widely used in pool water heating industry.

technic parameter

1. Compressor Rated Power Input /Output :2.8KW/11KW

2. Cooling capacity: 7.5KW, Heating Capacity: 8KW

3. Power                 :220V/50Hz4. Hot water output capacity  : 260L/H5.Size  (W×T×L)                 :925*400*960MM

6. -25 DC low ambient temperature use.

11kw heat pump for house heating (cooling and heating, -25 DC)