1.Hot Melt type road marking paint is usually used as the base material 2. resins, plastics, and together with other pigm

1.Product components:Hot Melt type road marking paint is usually used as the base material such as resins, plastics, and together with other pigments, fillers, additives mixed

alcoholic.2.main performance:(1)Quick dry solids:Three minutes after the construction of cooling Dry Solid, open transport in five minutes, long-term use no block, no deformation, wear well.(2)Reflective at night:Use high roundness, high reflectance of rutile titanium dioxide powder glass beads and imports. To paint with highly reflective effect at night(3)Bright in colour: Rutile titanium dioxide powder and using UV resistance to high temperature barium yellow pigment, high brightness and has a unique national standard

calibration of yellow.(4)Resistance to softening: Summer high temperatures softened the formulation of Science not, and will not crack by winter cold.(5)Antiskid property: Marking smooth, easily lead to the accident, science ratio of raw materials, high anti-skid performance.(6)Good liquidity: Construction of heated to between 180-210 degrees C, the paint will maintain a certain flow rate.(7)High coating weight:Coating configuration scientific and reasonable, the proportion within 1.8-3.2, paint coating of 180-220 square metres per ton.3.Construction temperature:180 degrees centigrade - 220 degrees centigrade, used for the construction of facilities for construction, rely on the paint dry onto its own heat,

is a typical thermoplastic road marking paint.4.Construction methods: Can usually be broken down into : hot - melt shaving, hot melt spraying, hot melt type oscillations, hot melt extrusion in a couple categories.5.Product classification: Is usually divided into two kinds of white, yellow color.6.Product quality: National Standard of Quality.7.Product packaging: Coated Plastic Woven bag, 25kg bag.

Marking paint