Directly connect to the inductance signal to achievement cards' collection Provide RS232/RS485 or I/O voltage infterface

1. General Description

TCR-610Pseries card collectors are designed and produced on industrial standard. It is mainly used for toll system of car parks, and also widely used for access barriers system. It reserved the reader antenna installation location, with options to quit cards and callback cards automatically if overtime.

Specification

l        Industrial design, good resistance to abrasion and corrosion,fit for high and low temperature environments

l        Directly connect to the inductance signal to achievement cards’ collection when car is coming

l        Provide RS232/RS485 or I / O voltage two control interfaces

l        Die-wide production ensure the products’ quality and consistency

1.1 Card Size Range

l        Card Width:           53 – 58 mm

l               Card Length:         76 – 86 mm

l               Card Thickness:    0.2 – 1.0 mm (Adjustable) (Default is 0.8mm)

1.2 Card Material

All kinds of paper cards and PVC / Mylar cards

1.3 Cartridge Sizes and Capacity

Cartridge Type	Cartridge Size(mm)L*W*H	Shape Size(mm)L*W*H	Card capability
			Max card thickness 0.2mm	Min card thickness 1.0mm
H	108×60×110	240×100×145	550	110
L	108×60×80	240×100×110	400	80

1.4 Weight Empty

0.7Kg (Include block pressure card)

1.5 Collect Time

About 1.0s

1.6 Electrical Specifications

l        Rating Voltage:                24V DC ±10%

l        Current Consumption:   Peak —1.8Amp

l        Static Consumption:   0.1Amp

1.7 Environmental Specification

l        Temperature:         -40°C to 85°C

l        Relative humidity: 30%-90%

l        Location:               Within a suitable cabinet

2 Control Interface Description

TCR-610p use Voltage control interface. Input is TTL; 2.54mm standard pin can be plug into CN1

2.1 TCR-610P CN1 Interface Definition

Pins	Signal Name	Description	Description
1	0 Volts		power
2	+24 V DC
3	GND		Logic 0
4	Receive	Card need to receive	Input required 200ms low voltage
5	Reject	Card need to reject	Input required 200ms low voltage
6	GND		Logic 0
7	Enable	Enable working	Input 10K resistance push-up, required 200ms low voltage
8	Time1	When the pin is logic high, T1=30s When the pin is logic low, T1=60s	Input 10K resistance push-up, required 200ms low voltage
9	Received	Card Received to depot	Output Open-Collector effective 500ms low voltage
10	Get Card	Card Enter	Output Open-Collector Low-Level effective
11	Rejected	Back to enter	Output Open-Collector Low-Level effective
12	Jammed	Card jammed in the machine	Output Open-Collector Low-Level effective

Card collector