1.X seal ring 2.used for a wide range of fields 3.Good quality and best price 4.Material: NBR

 X seal ring:

1.The four lobed design provides twice the sealing surface of a standard O-RING.

2.Because of the double-sealing action,less squeeze is required to maintain an effective seal.The reduction in squeeze means less friction and wear which will increase service life and reduce maintenance costs.

3.Very good sealing efficiency. Due to an improved pressure profile over the X-Ring cross-section, a high sealing effect is achieved.

4.The X-RING fits into grooves designed for an o-ring so there should be limited problems retrofitting the seal.

5.Unlike an O-Ring, the mould line flash lies in the trough, between and away from the critical sealing lips.

Dynamic applications:

1.for sealing of reciprocating pistons, rods, plungers, etc;

2.for sealing oscillating, rotating or spiral movements on shafts, spindles, rotary transmission leadthroughs, etc.

Static applications

1.as a radial-static seal, e.g. for bushings, covers, pipes, etc;

2.as an axial-static seal, e.g. for flanges, plates, caps, etc;

3.as an energizer element for elastomer energized hydraulic seals where there is a risk of the O-Ring .

X seal ring