Ads by Google
The T-300 series is cold applied Rubber Tape coating systems for anticorrosion of field joints, fittings, and specifically piping. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.
Product Advantages:
Heavy duty adhesive. Conformable to irregular shapes. No release liner / release liner. Established in ground history. Complies with AWWA (American Water Works Association) C-214 standard. Compatible with general coating systemsT-300 Joint Tape (Rubber Tape, Rubber Tapes, Rubber Sealing Tape) Series Coating Systems with AWWA C-214 Standard:
Type of Joint Tape (Rubber Tape) | T-365 | T-380 | T-3100 | T-3130 | ||||
Thickness (ASTM D 1000) | mm | mil | mm | mil | mm | mil | mm | mil |
0.64 | 25 | 0.76 | 30 | 1.02 | 40 | 1.27 | 50 | |
Tensile: | 31 lbs/in | 31 lbs/in | 41 lbs/in | 52 lbs/in | ||||
Length: | 40 Meter | 30 Meter | 25 Meter | 20 Meter | ||||
Width: | 2, 3, 4, 6, 9,12 | |||||||
Colour: | Black, White, Red, Blue, Purple, etc. | |||||||
Elongation: | 300% | |||||||
Peel Adhesion to Prime Pipe: (ASTM D 1000) | 230 oz/in, 25N/10mm | |||||||
Cathodic Disbandment: (ASTM G8) | 0.25 in radius 6.4 mm | |||||||
Water Vapor Transmission Rate: (ASTM F1249) | 0.2g/100in2 /24h, 0.3mg/cm2/24h | |||||||
Water Absorption: (ASTM D570) | ≤ 0.1 | |||||||
Volume Resistively: (ASTM E257) | 2.5 X 1012 ohm·cm | |||||||
Dielectric Strength: (ASTM D 149) | 40 KV | |||||||
Temperature Range: (Normal in Ground Service) | -30 to 160 oF, -34 to 71oC | |||||||
Rubber Tape, Rubber Tapes, Rubber Sealing Tape