rubber pipe plug: 1.material:rubber 2.features:. Economy practical 3.Light weight and convenient to take, and easy to constru Rubber pipe plug:Specifications: Trough the design of professional, this product is used in leaking hunting for drainage pipeline. It is made of high quality polymer materials, and because of good gas tightness and light weight, it could be used in all kinds of non-pressure and low tension pipeline.Working principle:The working principle of rubber pipe plug is made of using high quality rubber sealing gasbag by adding method so that it has expanded, when the gas pressure of sealing gasbag reach formulary requirement, the sealing balloon will fill in the whole pipeline section, and using the friction blocked leaking, thus achieved the goal that without ooze water in pipe. Before operation of pipeline work of flow condition, measurement the diameter of air into the sealing pipe; Hold on the side of the rubber pipe plug with air cock, slowly put the airbag into pipes. Before inflate the airbag, insert it completely in pipe, and connect the barometer and pump, then opened slowly the valve of pressure control table. The air pressure is controlled in safety area outside of pressure marked red. Taut drawing rope in sleepers on rope binding firm, through pressure control list, observation data, while it reaches the formulary requirement, close the vales of pressure control, and inflating is end. After that, within 20 minutes, keep connection between pressure control tables and pipe, observe data of air pressure sealing variation, if everything is normal, and then starts the work of pipeline construction. Features:1. Economy practical. It could be used in cast iron pipeline plug, glass fiber reinforced plastics pipeline plug, PVC, PPR pipeline plug, and double wall spiral pipeline plug and so on.2. Service plugging, and leak hunting.3. Elliptic type. It easy to stuff the pipeline and it has good plugging effect.4. Decay resistance.5. Super strong expansibility.6. Light weight and convenient to take, and easy to construct. Application:Pipe plug with rubber bag is always used in pip and culvert in order to excreting the sewage and waster water. And also used as the repairing rubber appliance. Because of its various specifications, it can be used to block the stream in various situations. 

Type	Accurate data(mm)	Pip diameter(mm)	Length(mm)	Pneumatic pressure(par)	Weight(g)
50	49	50	100	10	100
75	74	75	110	10	150
100	100	110	180	10	300
125	124	125	200	10	400
150	148	160	230	10	650
200	190	200	280	8	1100
250	242	250	360	7	2000
300	290	300	1000	6	26000
350	335	360	1000	6	30000

Note: This is the common specification. And we could produce as customers’ requirements and drawings.

Welcome to China,Welcome to DaCheng.

We are the factory mainly produces all kinds of rubber pipe plugs.We sincerely hope to start business relation wtih more customers and to provide better products and services.Any question,you can contact me freely.

Contact:Ms Isabel

rubber pipe plug