Flapper rubber rubber gasket
Product ID M30020 Applicability special for flapper. Material RUBBER Standard standards of rubber industry
2.Good seal performance,Long useful life
Special for flapper replacing
1.Turn off water supply and flush toilet to drain water from tank.Remove flapper and bracket,and clean flush valve seat with soft cloth.
2.Remove paper from one side of ring compound.Position exposed sealring compound around flush valve seat.Apply light pressure around seal ring compound to adhere to flush valve seat.
3.Remove paper from other side of ring compound.Make sure nothing interferes with the opening and closing of the flapper.The hinged portion of the flapper unit needs to be positioned in the preferred area as illustrated above and not in the area marked“NO”
4.Reposition flapper unit and apply pressure to bond flapper unit to seal ring compound.Make sure pressure is applied evenly around the entire unit.
5.Attah lift chain to flush lever arm.If necessary adjust length of chain by relocating attachment clip to a lower point on the chain.So that only a little slack remains when in the closed position.
Flapper rubber gasket