Ads by Google
Super Waterproof RFID security guard Tour system
GT04 RFID Guard TourReader is designed for the harshest environments. The metal body protects the electronics against damage and secure the collected data, arethe key points to GT04 RFID Guard Tour Reader's extreme durability. With special waterproof pad and adhesive, the reader is so waterproof that it evencan work under water. Furthermore, over 10,000 reads are able to be storedbefore the next download of data.
IT works with the popular RFID tag. With a simple non-contactswipe, you can access information from tag, and then download patrol data toour intellectualized management software with a USB port cable. The informationreports can demonstrate the guards patrolling activities.
Features |
Stainless steel body, molded rubber handle, super durabilityNon-contacting readingCompletely water proofSabotage absorbent, resistant to electrical shockUSB cable communications, high download speedSuper storage capacity 10,000 recordsRead RFID tagEasy maintenanceReading distance ≤ 5 cmBrilliant exterior design, easy operationReal time internal clockLow power consumption and long battery life, 500,000 continuous reads |
| TechnicalInformation | |
| RFID Guard Tour Reader BeSeen-GT04 | |
| Physical | Stainlesssteel body, molded rubber handle, super durability |
| Dimensions | 155XΦ27.5mm |
| WorkingFrequency | 125KHz |
| OperatingTemperature | -45°to +85°C |
| Humidity | 5%to 95% non-condensing |
| StorageCapacity | 10,000 piecesrecords |
| Battery | 3.7V rechargeable lithium battery, 800mAh |
| SignalCard Detection | Autoinduction card-reading |
| CardReading Distance | 3cm-5cm |
| Communication | WithUSB2.0 Cable |
| Weight | 220g |
| Waterproof& Dustproof | IP67 |
| Anti-explosion | ExiaⅡBT4 |
RFID Checkpoint Tag Features
RFID tags are constructed to withstand intentional sabotages,which can be read from long distances and operated in wide temperature ranges.They are also completely waterproof, and can be sealed inside non-metallicmaterial walls; Button, circle, keyring, nail and cylinder-shaped cards used asguard tour checkpoints. These can be installed either on or beneath wallsurfaces; Key chain-attachable type personnel / incident card used to identifypatrol personnel or events and incidents. Its working frequency is 125KHz.
USB communication cableThe usb cable can be used to connect between the reader and PC, which is according with DY/T1019, IEC61156, ANSI/EIA/TIA-568 standard.
Hardware quick start guide1. The patrolling guard takes the reader and read his own Guard ID to identify himself with the system
2. Then the guards go to the checkpoints, the Reader will automatically read each RFID tag and no need touch it. When reading successfully, a flash of the red indicator light accompanied by a ‘Beep’ means that a reading has been made. The reader will store the signal card’s ID number and time for every station reading.
3. After patrolling are done, use the USB port cable to connect the computer and the Reader directly and have a data analysis and management.
D building guard tour system