Welcome to ECVERY
Polymeric Housed Metal-oxide Surge Arrester
Polymeric Housed Metal-oxide Surge Arrester
Supplier Info
[China Supplier]
Contact Person : Ms. Nie Sharon
Tel : 0086-0739-2613863
Fax : 0086-0739-2613303
Product Detail
Polymeric Housed Metal-oxide Surge Arrester 1. Current:10KA, 2.Rated voltage:35kV 3.Certificate:ISO 9001. 4. OEM welcomed

Polymeric Housed Metal-oxide Surge Arrester

Condition of use:

1. The ambient air themperatures is no higher than +40°C,no lower than-40°C

2. The altitude above sea level dose not exceed 1000m

3. AC system frequency is 48HZ or 60HZ

4. AC voltage brought to bear on arrester for a long time dose not exceed arrester’s continuous operating voltage

5. Maximum wind speed dose not exceed 35m/s

6. The earthquake intensity dose not exceed 7 degrees

The detailed of products:

The main parameters list of lighting arrester
The systerm nominal voltage(KV) TypeRated Voltage (kv)(r.m.s)Continuous  operating voltageCurrent impulse residual voltageDischarge voltageDirect-current reference voltagePower frenquency reference voltage2ms Square Wave flow capacity (A)Withstand capacity of  of high inpulse current 4/10 s  (KA)
8/20  s Lighting Current  Impulse (kv)30/60 s Switching Current Impulse (kv)1/4 s Steep Current    Impulse (kv)
0.220.38YH1.5WS-0.28/1.3YH1.5WS-0.5/2.60.280.50.240.42 1.31.6 0.61.20.280.57510

Polymeric Housed Metal-oxide Surge Arrester

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.