Vibration Sensor Alarm 1.Omnibearing detecting 2.High anti-interference capacity 3.Small cubage 4.Adjustable sensitivity

 Vibration detectors can distinguish not only the vibration caused by explosive but also the one caused by tools such as diamond tip drill, mechanical and hydraulic hammer, flame cutting machine, heat rush or high-pressure water jet cutting machine. Gyroscope sensor and digital signal processing performances can monitor the narrow frequency range to provide reliable detection.

Vibration detector can ignore environmental conditions such as air mobile and noise etc.

Sensitivity can be selected by DIP switch, which can choose not only the corresponding sensitivity setup for application, materials and objects but also any current interferences available.

Vibration Detector can be installed on steel plate with flat surface. The surface shouldn’t be paited. The levelness diviation shouldn’t be more than 0.1mm. If all these requirements can’t be met, the mounting plate must be used. The vibration detector can’t be installed directly on concrete which has or hasn’t been plastered.

Weight 0.10kg

Net weigh 0.08kg

SizE 6.0cm×4.5cm×2.1cm

Vibration Detector Alarm