Welcome to ECVERY
Automatic Production line of out barrel
Automatic Production line of out barrel
Supplier Info
[China Supplier]
Contact Person : Mr. Shuo Heng
Tel : 86-534-5215452
Fax : 86-534-5236452
Product Detail
1.used for the pressure and seal the outer barrel after folded the edge 2.motor reducer drive 3.Roll forming system

Automatic Production line of out barrel

 

We are located in Yinhe Development Zone of Ninjin County Shandong China. Our factory has an area of 115000 square meters and we have complete and advanced manufacturing equipment. Now we have 35 professional technicists, accounting for 3% of the total employees. We have passed by ISO9001,ISO2000 authentication.

This combined machine with rolling-installing is designed according to the WC6Y-63/2500 press machine and the advanced technology of America.

Shape of the machine body: one side closed, another side opened

The transmission system: the crank rod system with pulley, gear, pneumatic clutch and brake. The bottom end fixed with one poles, and the other side produce the cut by support with the fulcrum.

Mould: has double function with the pressure and rolling for the cut.

Main performance parameters and configuration

Item

Name

parameter

Technical specifications and parameters

The shape of the working piece

round

The minimum stamping force

Min600KN(60>52≈1800×7×4=50.T

Designed capacity

80T

Diameter of the barrel

No less thanΦ350(length of the barrel less than 2000mm)

The maximum length of the barrel

Depends on the request of customer

Adjustable space of the bottom bar

less than 30mm

Adjustable space of the supporting plate

less than5mm

Route of supporting plate

less than70mm

number of continuous punchings

60times/min

Working parameter

throughput

3pcs/min(example:350mm barrel)

High level. Die

1300mm

Modulus of main components

The maximum modulus bending beam section

 

240-290 steel

 

Calculated modulus: 1240>869(cm3)

Frame mold designed according to the actual needs and rotation institutions condition.

The transmission system use sliding bearing structure

pneumatic brake and clutch

lubricating system

quantitative oil cup

electrical control system

single test controll, two or four joint control, and automatic

control in regular production

Processing conditions

supply workpieces

Manual work

Move workpieces

Manual work

Remove workpieces

 

Manual or automatic

 

Main body of the machine

lathe bed

Overall welding, aging treatment

Lead rail of the board

 

Protection of machine

set shield on important parts.

Protection over mould

Mechanical safety protection

supporting cylinder

Reaction time 2 seconds

mould

Assembly form

single split mold

Turn on

return switch Spring life 100000 times

electrical control gear

Electrical specification

Primary power

380V±10%

Input circuit

380V

Circuit of main motor

24V

Control loop

380V

Light of machine

36V

stop

Panel

Click Protection

Thermal relay, overload protection, grounding protection

     

Automatic Production line of out barrel

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.