Welcome to ECVERY
soalr laminator
soalr laminator
Supplier Info
[China Supplier]
Contact Person : Mr. Xu Mike
Tel : 86-513-84105399
Fax : 86-513-84105505
Product Detail
1- Project planning 2- supply of complete production line 3- Installation 4- Trial production 5- After sales service

 

REOO     Leading manufacture of solar module laminating machine in China    

1. Application:

As the equipment of manufacturing solar module limited to laminate glass, EVA (Ethylene Vinyl Acetate Sheet), solar cell and back sheet

2.Good service:

  design floor plan as customer's requirements

  provide technical support, trainning, installation, commisioning

 Turnkey project

  

3.Technical parameter and product specification: :

Dimension : 14600mm x 2460mm x 1300mm  Laminating area: 4600mm x 2200mm.

Laminating height: 25mm

Total power consumption: 75 KW ( AC380V, 60 Hz , or according to customer's need )

Air source: 0.6 - 1.0 MPa.

Operating mode: Manual / Automatic.  Control system :  PLC ( Delta).   HIM system: Touch screen ( Delta)

Heating mode: Oil Heating ( SD320 heat-conducting oil, capacity: 170 L, flow pressure:0.3 Mpa.), inculde: main heating and adjustable heating.

Temperature control: PID intelligent temperature contol system.

Temperature uniformity in working area: ≤ ±1.5 °C

Temperature control accuracy:≤± 1 °C.

Temperature control range: 30°C - 180 °C

Pumping rate:  70 L/s .Laminating time: 2 - 4 mins ( excluding sollidification time )

Heating rate: 135°C at room temperature with 50 to 60 minutes

Vacuum rate: 200 L / S, the limit vacuum 70 ~ 90 Pa, vacuum Time: 90 seconds

Silicone sheet size: 3800mm * 2400mm, 5 mm thickness. It will be changed after 1500 times.

Lid opening: Straight from the hydraulic, the biggest opening height: 200 mm

Total weight: 15.8 T

 

4. Production capacity:

Conventional 300 Wp (1650*1030) solar module, 4 pcs in one cycle time.

Production capacity:  300 W * 4 pieces /  time * 3 times / h * 8 hours * 300 days= 8.64 MW / year.

Warranty period: 12 month.   (Exclusive easily damaged parts)

5. Payment terms:

55% of the contract value be pay by T/T advanced.

45% of the contract value be pay by T/T before shipment. or, pay be L/C at sight against Bill of lading, Invoice and Packing note.

soalr laminator

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.