Ads by Google
Structural Alloy Steel plates A506
Alloy Steel plates A506
1 Thickness: 8-400mm
2 Width:1600-4200mm
3 Application:construction
4 Character: high Cr and Mo
5 Specification:A506-05
6 Material:Alloy steel
7 Experience:15 years
8 MOQ:1 Ton
A506-05 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
alloy steel sheet; alloy steel strip; cold-rolled alloy steel; hot-rolled alloy steel; standard alloy steel; structural alloy steel
chemical composition
Grade | C | Mn | Si | Cr | Mo | S≤ | P≤ | Nb | V | Al |
Cr5Mo,P5 | 0.15max | 0.3~0.6 | 0.5max | 4.0~6.0 | 0.45~0.65 | 0.025 | 0.025 |
|
|
|
regular specifications
Flat steel (thicknessX width)mm | hot-rolled,forging round bar (mm) |
30~250x150~610 | 60~380 |
Scope
1.1 This specification covers hot-rolled and cold-rolled alloy and structural alloy-steel sheet and strip. Alloy steel is furnished to chemical composition requirements and is intended primarily for general or miscellaneous use where bending and moderate forming is a requirement. Structural alloy steel is furnished to chemical composition requirements and to specific mechanical property requirements which may include tension tests, hardness tests, or other commonly accepted mechanical tests.
1.2 If material of a higher degree of uniformity of internal soundness and freedom from surface imperfections is required, reference should be made to Specification A 507.
1.3 Alloy and structural alloy-steel sheet and strip are not produced to internal cleanliness requirements. Normally surface imperfections are not objectionable, and a good finish is not a prime requirement.
1.4 The formability of structural alloy steel decreases with increasing yield strength or hardness. Therefore, product design in relation to the mechanical properties of the grade used must be considered.
1.5 The material covered by this specification may be furnished in several conditions: heat treatments, surface conditions, and edges, as specified herein, in coils or cut lengths.
1.6 The values stated in inch-pound units are to be regarded as the standard. SI units are provided for information only.
Structural Alloy Steel plates A506
BV-Certificate
Alloy Steel plates A506
Alloy Steel plates A506
Alloy Steel plates A506
Produce Department
Alloy Steel plates A506
Alloy Steel plates A506
Our Stock
Alloy Steel plates A506
Our Produce Department
Alloy Steel plates A506
With coating
Our company is Tianjin Jianghailong Steel C.,Ltd, as a comprehensive enterprise concentrating both on production and sales,specializing in seamless steel pipe,casing pipe, pipeline pipe , high /low/ middle boiler steel pipe and so on.
Our management philosophy is to survive by quality, develop by product, cooperate by credibility, and win customer by service. We sincerely serve for you.
Structural Alloy Steel plates A506
Alloy Steel plates A506