KSD-01 F temperature control switch product introduction:Working principle:KSD-01 F the temperature control switch TO-220 packaging form, the sudden jump type, single/single point of contact at the 100% conductivity structure, when the outside temperature is high, the transfer TO the correction of optic-fiber rapidly motion so that cut off or connect circuits (closed or TO often open two), when the temperature dropped TO reset temperature, optic-fiber and rapid restoration, of repetition of work TO ensure that the product of the temperature protection safety.Product use:Apply to save space PC board. Typical USES include circuit of the alarm or shut down overheating system; The computer and the computer peripheral equipment, electrical equipment; Electronic products; Power supply; The plane, automotive, medical equipment and test equipment; Household appliances and circuit board for control of mild thermal overload protection.Technical parameters:1. The overall size (chief x width × thick) : 29.7 x 10.2 x 4.7 mm 2. Temperature range: 0 °C-130 °C (every 5 °C a specification)3. Contacts type: closed-D (dynamic broken) & often open-H (dynamic $) 4. Encapsulation:TO-220 metal bottom or a plastic floor5. Contacts resistance:≤ 50 m Ω6. Insulating value:≥ 100 M Ω quartile (500 VDC)7. Insulation intensity: 1500 V/DC, 60 Hz8. Standard tolerance: ± 5 °C9. The work environment temperature: 160 °C and 55 °C- (the highest temperature: 260 °C short 10 seconds)10. Weight ≤ 2 g11. Contacts load: 220 VAC 1 A or 24 VDC 3 A
KSD-01 F temperature control switch