Ethernet Switch 1.2 100Mbit/s fiber ports,supporting automatic negotiation 2.Standard IEEE802.3 3.Power supply:+24VDC

Description:FHC rail switch FHC2006M-2SM/2MM provides 2 uplink redundant 100Mbit/s optic ports. The uplink redundant fiber optic interface can be used to build a self-healing fiber optic ring network. When the system fails, the time of redundancy reversal is less than 300ms and the reliability of the system is thus improved. It also provides two power ports 100 Mbit/s to build a self-healing power port. When the system re-configures, the time of redundancy reversal is less than 300ms. Due to its self-adaptability, each of the four 10/100Base-T twisted-pair ports can automatically set up to 10BASE-TX state or 100BASE-TX state as well as full or half duplex operation mode. The starting time for this function can be reduced by connecting the equipment through the plug and play mode. 24V power supply redundancy is provided to improve the reliability of the network and the system. FHC2006M-2SM/2MM has a WEB-based on network management system. These functions facilitate the simple and easy establishment and installation of FHC2006M-2SM/2MM. A +24V power supply is used for powering the system and the redundancy mode can also be set up.Equipment Parameters2 100Mbit/S fiber ports, supporting automatic negotiation of optic port6 100Base-TX power ports, with RJ-45 shield and supporting automatic negotiation and automatic polar identification. It is in line with Standard IEEE802.3.System transmission distance: for multi-mode port with greater than 8 dbm, transmission distance: 5 KM; for single mode port with greater than 8dbm, transmission distance: 30 KM. System redundancy switch duration: not greater 500ms System store and forward rate: 148810 PPS MAC address table: 8K Power supply: +24VDCSystem power consumption: less than 5WOperation temperature:-30~70Operation humidity: 10%~95%EMC complies with GB 92541998Cabinet structure: 51×136×100mm IP30 protective grade, aluminum housing.DIN rail mountOrder information product type Function Description FHC2006M-2SM 2 redundant 100Mbit/s single mode fiber ports2 100Mbit/s power ports with RJ-45 shield that can build a redundant ring network.4 10/100Base-T power ports with RJ-45 shield that is in line with Standard IEEE802.3. FHC2006M-2MM 2 redundant 100Mbit/s multi-mode fiber ports2 100Mbit/s power ports with RJ-45 shield that can build a redundant ring network.4 10/100Base-T power ports with RJ-45 shield that is in line with Standard IEEE802.3. Product application: Remote network connection Factory automatization SCADA/DCS system Power grid distribution automatization Transformer station system automatization Mining sites in bad environment National defiance/military industry/train/warship carrying equipments

Unmanaged Industrial Ethernet Switch