Component - Switch: switch with 13.2V regulator & LED Indicator (4' long Trail-Tech female)
The smart switch is designed for HID bike light. The switch regulates input DC voltage from 13.5V - 18V to stable 13.2V, which is the best operation voltage for HID bike light. You can connect the smart switch to 14.8V Li-Ion battery pack make HID light brighter and service life longer ever
Features:
4' long Smart Waterproof on-off switch with LED Indicator (Convert voltage DC from 16.8VDC 2A Max to 13.2VDC 2A Max) with Male and Female Trail-Tech coaxial connector Input end: 18AWG Open wire end Black wire = Negative. Red wire = positive Input: 18VDC 2A Max Utilize to plug with the Trail-tech female plug battery pack. Output end: Trail-tech female waterproof coaxis lockable connector. Output: 13.2VDC 2A Max Weight: 1.8 oz (55.98 gram) Handle current up to 2 Amps. Waterproof and lockable connector can be used under water up to 2 feet Perfect for bike light. Simply DIY with SmarTEC 14.8V Li-ion pack for bike light Perfect utilize with Trial-Tech HID light system up to 13W ( Not good for 30W HID light )Note: For the 14.8V Li-Ion pack that have ONLY one charge/discharge terminal, Please disconnect the smart switch before charging by 14.8V Li-Ion charger.
Warning: Please check wire polarity with voltmeter before connecting to device. We are NOT liable for any damage to your device due to reverse polarity
Component - Switch: switch with 13.2V regulator & LED Indicator (4' long Trail-Tech female)