Time Delay 30~120 seconds Swivel Incorporated Neoprene Gasket Screw Thread & Zinc Alloy Nut Additional Swivel

The photoelectric switch JL-115 is applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level.

This product is designed on the basis of electrical heating structure that provides time delay over 30 seconds to avoid redundant switching against spotlight or lightning during the night time. A temperature compensator system provides consistent performance regardless of the ambient temperature.

JL-115 has a gathered swivel with the sensor/switch body for convenient direction adjustment after installation. Additional swivel is also available for further adjustment.

This product was designed with the Standard for Non-industrial Photoelectric Switches for Lighting Control UL773A.

Model	JL-115A	JL-115B
Rated Voltage	100-120VAC, 50/60Hz	200-240VAC, 50/60Hz
Rated Loading	500W     Tungsten 850VA     Ballast
Power Consumption	1.5VA
On/Off Levels	10~20Lx   On (Dusk) 30~60Lx   Off (Dawn)
Ambient Temperature	-40°C ~ +70°C
Related Humidity	95%
Body Meas.	Body: 120(L) x 38(W) x 32 (H)mm; Stem:27(Ext.)mm; 180o
Swivel Meas.	85(L) x 36(Dia. Max.)mm; 200o
Lead Length	150mm or Customer request
Approx. Weight	68g (Body); 24g (Swivel)

It is normal for the SWITCH to take several minutes to turn off when first installed.

To test “turn on” during daytime, cover its eye with black tape or other opaque material.

Do not cover with finger because light traveling through fingers may be great enough to keep the switch open.

Test will take approximately 2 minutes.

Swivel control