Ads by Google
1.Main dimension:
120±0.05mm in length
84±0.05mm in width
70±0.05mm in height
2.All holes need flying cut,required surface roughness Ra 1.6;
3.Unmarked tolerance should refer to GB/T6414-1997 C75 standards;unmarked tapping hole tolerance is ±0.1;
4.Unmarked size tolerance should refer to GB-T1804-f standards and unmarked form and position tolerance should refer to GB/T118k-k;
5.The fineness is 0.8mm;Unstated tolerance of screw thread is ±0.05mm;
6.The plated product suface should be carefully protected and should have no burrs,scratch or scrape;and all sharp edge of the tapping hole should be chamfered;
aluminum cnc machining housing for telecommunication filter