Fiber Mechanical Splice FTTx application Easy and fast installation No any other tools needed Fiber Mechanical Splice Mechanical Splice Specifications

Fast Mechanical splice adopt mature V slot butt technology, it is used for the connection of SM or MM fiber, easy to operation,

Fast Mechanical splice adopt mature V slot butt technology, it is used for the connection of SM or MM fiber, easy to operation, simple work fixture. Not only suitable for different type of the optical cable, the FDU fiber connection , the connection between the pigtial and the Home Multimedia flex, but also for the repair of the damage line  to achieve the steady connection.   

 Mechanical Splice feature

 Exact metal alloy element, automatic alignment, long exceptional optical performance.  Fiber axial direction joint steadily, to avoid the performance reduction cause by the matching fluid drain away. Unremitting joint technology, the signal will not be influence by the environment. Bare fiber, tight layer, pigtail  treble clamping, can meet all the use environment Gleichschaltung crust protection, to against the bad operation environment High mission success ratio and easy to operation, average splice time:150s. Can be used in FTTx fiber connection and the damage line repair. To achieve the steady connection.

Specifications
Type	MW-10
Average Insertion Loss	≤0.3dB  (typical 0.1dB)
Return Loss	>45dB
Installation Time	30 s
Fiber Coating Size Rang	250um on 900um
Tensile Strength	4N
Shelf Life	25years
Operating Temperature	-40oC~70oC
High Temperature Storage	2000hours with IL<0.2dB change (85oC)
Low Temperature Storage	20000hours with IL<0.2dB change (-40oC)
Damp Heat Storage	2000hourss with IL<0.2dB change (85%RH,85oC)
Temperature Cycling	Change IL<0.5dB (-40oC~85oC)
Vibration	10 to 55Hz 1.52mm maximum excursion three axis IL            <0.2dB change,two hours in each plane
Water Immersion	Change IL<0.2dB (168H@43"C;PH=5.5+0.5)
Thermal Shock	Change IL<0.2dB (100oC~0oC,10cycles)

Fast Fiber Mechanical Splice