Ads by Google
| Description: The FHC1000-3S10A10-LD5 is an Ethernet media converter that converts media transmission between UTP Copper cablings and fiber SFP (Small Form-Factor Pluggable) Transceivers. The FHC1000-3S10A10-LD5 copper-to-fiber module is available in 1000 Mbps Gigabit Ethernet types, allowing seamless integration between Gigabit Ethernet networks using unshielded twisted pair (UTP) copper cabling, and Gigabit fiber networks. FEATURES: | ||||||||||||||||||||||||||||||||||||||||||
| - Conversion between different transmission speeds and media types- Standalone and compact hardware design- Auto-negotiating Ethernet port (Half/Full Duplex)- Auto-crossover Ethernet port (Supports Auto MDI/MDI-X)- Standard open Fiber slots for SFP Transceiver- Built-in Link Loss Forwarding Technology- Easy Installation, Easy Troubleshooting- Long-haul Gigabit Ethernet Specifications: Standard Compliance ·IEEE 802.3ab 1000Base-T·IEEE 802.3z 1000Base-SX/LX standards·IEEE802.3x Flow Control and Back pressureConnector and Interface ·Fiber: SFP 3.3V·RJ-45 Socket: CAT-5 (1000Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto-Negotiation Function Support Link Loose Forward ·TX to Fiber: If TX port link is broken, then converter will force the fiber to link down.·Fiber to TX: If Fiber port link is broken, the media converter will force the TX port to link down.DIP Switch ·DIP Switch 1: Fiber Auto-Negotiation/1000Mbps Full Duplex mode·DIP Switch 2: TX to Fiber LLF(Link Lose Forwarding) Disable/Enable·DIP Switch 3: Fiber to TX LLF(Link Lose Forwarding) Disable/Enable LED Indication·FX, TX, FEF, RX, PWR, 1000MPower ·Standalone (external adapter):DC 5V / 2ADimension ·120 (L) x 92 (W) x 26(H) mm, power externalOperation Environment ·Operating temperature: 0°C ~ 70°C·Storage temperature: - 40°C~ 85°C·Operating humidity: 10% ~ 90%, non-condensingSafety· UL , CE and FCC ORDERING INFORMATION:
| ||||||||||||||||||||||||||||||||||||||||||
1000M SFP Media converter