Ads by Google
DB6000 Bridge/AP D212T1. built-in 5.8G 23dBi antenna wireless bridge/ap2. 802.11a/g/b 3. 108Mbps4.dual modules
DB6000 Bridge/AP D212Tof DoubleCom is a tri-mode ABG carrier-class wireless device which is interchangeable, high-performance, high-bandwidth, multi-functional and outdoor-type. The device has the features that it has the two-way RF Output and owns the 5.8G maximum transmitting power of 200mw and the 2.4G maximum transmitting power of 400mw, and one of modes is built in a 5.8G23dBi antenna. The bandwidths of the two-way RF modules are independent, reaching 108Mbps respectively.
DB6000 Bridge/AP D212T, which supports the IEEE802.11 a / b / g modes, can work in the licensed bands of 2.4G and 5.8G and support three kinds of operating frequencies——5/10/20MHZ. Moreover, it has many non-overlapping channels and owns strong anti-interference ability and high bandwidth, which makes it able to offer industry-leading wireless solutions. The device has all wireless modes—— the Access Point (AP), Bridge Point to Point (PTP), Point to Multipoint (PTMP) Connections, Wireless Client (APclient), the Wireless Distribution System (WDS), MESH, Virtual AP, multi-VLAN supported ,etc., and also the features——NAT, Routing, DHCP, user authentication management, firewall, VPN, bandwidth management, QoS, and other functions.
Technology Specifications | DB6000 Bridge/AP D212T |
RF | |
Band | IEEE11b/g 2.400~2.4835GHz IEEE11a 5.180~5.825 GHz |
RF Power Output(EIRP) | Module 1/Module 2 11a 23dBm 11b/g 26dBm |
Sensitivity | -92dBm @11M/6Mbps -78dBm @ 48Mbps -74dBm @ 54Mbps |
Modulation | DSSS,OFDM |
Data and Operating Parameters | |
Automatic Rate Selection | IEEE802.11b 1/2/5.5/11Mbps IEEE802.11a/g 6/9/12/18/24/36/48/54/72M/96M/108Mbps |
Data Link Automatic Reset | Yes |
Standard | IEEE 802.11b,IEEE 802.11g,IEEE802.11a,IEEE802.3d,IEEE802.3u |
Supported Protocols | NSTREME,CSMA/CA,TCP/IP,IPX/SPX,NetBEUI,DHCP,NDIS3,NDIS4,NDIS5 |
Management | |
Mode | AP,Bridge,Station,Wds,Wds-station ,etc. |
Device Reset | Software without having to open the casing |
Site and the use of the channel to detect | Yes |
Receive level display | Yes |
Security | |
MAC Address Control | Yes |
WEP encryption | 40/104 bit WEP WPA pre-shared key |
802.1x | Yes |
Hardware | |
CPU | 600MHz |
SDRAM | 64M |
LAN/WLAN | RJ-45*1 RF(N-K)*1 |
Power | DC 9-28 Volt + 5% 2A (Max.) AC adapter AC 90V ~ 264V, Five-line remote-powered(POE) |
Environment and physical properties | |
Temperature | -40~70°C |
Storage Temperature | -45~80°C |
Humidity (non-condensing) | ≤95% (Non-condensing) |
Antenna | Built-in 23dBi directional antenna, horizontal/vertical radiationlobe angel 12° |
Weight | About 1.77kg |
Current Consumption | 10W(Max) |
Fixed | PRC rod bolt, Hold rod diameter ψ30~ψ55mm/ Hoisting |
Special design | Wind, rain, sun, dust, shock and thermal proof design |
DB6000 Bridge/AP D212T: built-in antenna dual-module wireless bridge