Ads by Google
Technical Specifications for Micro Duct:
S.No. | Parameter | Specification / Tolerance |
1 | Density | 0.940 to 0.958 g/cc at 27ºC |
2 | Melt Flow Rate | 0.2 to 1.10 gm /10 Minute at 190ºC & 5 kg load |
3 | Minimum Bend Radius | No cracking, splitting, breaking or permanent reduction in diameter when bend to 180º at radius of 10 times the diameter |
4 | Internal Pressure Test | 5 Minutes at 27ºC & Induced stress at 3.8 mpa. |
5. | Internal Coefficient of friction | Max 0.1 at 6.8 Kg load |
Dimensions (in mm) of Silicoat PE Micro Duct :
Nominal Size | Outer Diamter | Wall Thickness | Inner Layer Wall Thickness | Ovality | |||
OD | ID | MIN | MAX | MIN | MAX | MIN | |
7.0 | 5.5 | 6.9 | 7.1 | 0.65 | 0.75 | 0.10 | 0.20 |
10.0 | 5.5 | 9.9 | 10.1 | 2.15 | 2.25 | 0.10 | 0.20 |
10.0 | 8.0 | 9.9 | 10.1 | 0.9 | 1.0 | 0.10 | 0.20 |
10.0 | 7.6 | 9.9 | 10.1 | 1.1 | 1.2 | 0.10 | 0.20 |
12.0 | 8.0 | 11.9 | 12.1 | 1.90 | 2.10 | 0.10 | 0.20 |
12.0 | 9.6 | 11.9 | 12.1 | 0.90 | 1.0 | 0.10 | 0.20 |
Note * 14/10 mm size also available | |||||||
micro duct(ASTM,ISO9001)