RJ11 IDC Telephone wall Jack with GEL filled
Gel filled inside
Dimensions:55×50×20.9mm
Socket material: PC( UL94V-0)
box material: ABS
Oxygen number: 30%
Chemical resistance Corrosion Corrosion test is in compliance with IEC-60068-2-11 standard,
comtact resistance, following completion of
the test,not increase for more than1 Milliohm
with regard to the initial contact
resistance quantity.
Finishing 6u",15n",30u",50u"
Contact pressure
(plug termination side):4.5-5.5N/sp.m
Treatment porosity fill with gel
Male plug introduction RJ11 6P2C
Shocks resistance 55-64N/sp.m
Free drop test 1.5m Height.
Insertion force 20-50N.
Storage Temperature Range:
-40+90
Operating Temperature Range:
-30+80
Relative Humidity:<95%(at20)
Atemospheric Pressure :
70KPa106KPa
RJ11 IDC Telephone wall Jack