Load 4 beams from warping machine on beam frame, a motor on frame drive the 4 beams to wind yarns into one loom beam at even spe

Load 4 beams from warping machine on beam frame, a motor on frame drive the 4 beams to wind yarns into one loom beam at even speed with proper tension.

Technical Features:·Automatic control by MISTUBISHI PLC·Closed loop yarn winding and unwinding control by inverter motor, electric-pneumatic proportioning valve and liner displacement transducer·Measuring roller is connected with liner displacement transducer·6 inches touch screen for data setting and display·Upper and lower press roller connect with two pneumatic cylinder for tightening yarn, increase winding angle of draw-off roller to avoid yarn sliding on roller·Both of draw-off motor and unwinding motor are equipped with brakes, beam in running condition can be stopped quickly whenever required so.·A rotary encoder is designed on guide roller to measure warp length. ·Unwinding is controlled by inverter motor via a gearbox·Beam loading and doffing is controlled by supporting arm pneumatically·Guard rail and infrared device for guaranteeing operators safety

Technical Parameters 1 Loom beam dia. ø550-ø1016mm 2 Warp beam dia. ø550-ø1016mm 3 Width of loom beam 900mm 1700mm 4 Width of warp beam 1378mm or to order 5 Beaming speed 5∼120m/min 6 Warp beam No. 4 or to order 7 Unwinding tension 50∼500N 8 Winding tension 600∼6000N

HFBBZ170 Glassfiber Rebeaming Machine