Welcome to ECVERY
Supplier Info
[China Supplier]
Contact Person : Ms. Huang Joy
Tel : 86-21-69696809,13918176973
Fax : 86-21-69696826
Product Detail
Can winding both soft and hard cone Can use all kinds of yarn especially for nylon Stanard 24 spindle per one set

The Characteristics For the ProductsThe conical shape of bobbin can be formed on the same machine.The single spindle control,one electronic motor for one spindle(0.18KW),one frequency converter self control device,the parameter can be adjusted freely,the speed is 1400- 1900turns/minute.The auto stop can be controlled by electronic light control,auto stop when the bobbin is full,memory storage,length calculater and counter,frequency converter makes even speed decrease and makes the same tension strength,The inner and outer tightness and looss is the same.Slow speed start 3-15 seconds, changeable take up quantity for the edges.All the bearings are imported ones.The loose straight bobbin dying,applying the double wheels over feed,double mini electronic motors transmission for the transmission of the yarn to make the dying deeper and go through without the colour difference.It can be applied for the dying bobbin wind for string, yarn, chemical fibre DTY,silk and man made silk.The Main Technical ParametersSize:One side,single spindle,automatic control,four spindles for one segment.

Spindle distance:300millimetersSpindle Quantity:8 spindles/set,12 spindles/set,16 spindles/set,20 spindles/set,24spindles/setSpindle speed:one set of 0.18KW electric motor for one spindle under the control of the frequency converter with the ability of constant speed increase,constant speed decrease and stepless speed change.The spindle speed for the loose bobbin is1600turns/minute, The spindlespeed for the tight bobbin is1900turns/minute,2600turns/minute.The form of the bobbin:straight shape,conical shape.The content for the bobbin:250g,500g,750g,1000g and 2000g.They can be adjusted freely on one spindle.The forming of the bobbin:applied the mode of gauge finer. The straight and conical shape bobbin can take up and wind on every angle.

The power of the electric motor:0.18KW/spindleThe power distance:120-200millimeters,changeable take up quantity for the edges.The outer diemension for the complete machine:8050(length x 990(width) x 1345(hight) millimeters/24 spindles


Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.