CO21 warping machine is same as this above picture ,just difference from the control panel ,H21 has not touch screen,

 

Technical parameters:

Line Speed	0~600m/min
Max. Tension of line	400N
Brake Torque	200NM
Up and Down of Beam	Pneumatic control
Tight and release of Beam	Pneumatic control
Diameter of Speed Roller	80mm
Power of Main Motor	5.5kw
Control type of Main Motor	Converter Control
Monitoring Way	Converter real-time monitoring
Pressure of Pneumatic source	4bar

H21 warping machine is suitable for Φ21”×21” and Φ17”×14” beam.And Φ500x600mm beam

Technical specification:                                     

The main motor is controlled by converter. The constant and reliable digital pulse close ring guarantees the speed fast or slow is stable. The bracket movement of beam is controlled by pneumatic, and its position is accuracy controlled by the operator, which select the different position according to beam's diameter.

The tail bracket is controlled by pneumatic, and the shaft adepts centre fixing shaft head. These two features make the damage to inner beam caused by the shift lower down to the minimum.

The main brake and the roller brake adepts electronic disc brake. And the braking force is contorlled by electronic regulator. Front and rear brake synchronization

The reed motors of width direction and sides direction adopt AC small motor.which are simple and easy to operate.The starching plank adopt manual control.

CO21 Microcomputer Control Warping Machine