Ads by Google
Material:Gr.1, Gr.2, Gr.3, Gr.4, Gr.5, Gr.7, Gr.9, Gr.12
Standard: ASTM B348/GBT 2965, AMS4928, F67, F136, Size:Dia100*40mm, 100*45mm, 98*40mm, 95*40mm, 80*50mm, 80*45mm, 80*40mm
Chemical composition
Standard | Grade | chemical composition % not more than | Other Elements | |||||||
Fe | C | N | H | O | Al | Si | Single | combination | ||
ASTM | GR.1 | 0.20 | 0.08 | 0.03 | 0.015 | 0.18 | - | - | 0.10 | 0.40 |
ASTM | GR.2 | 0.30 | 0.08 | 0.03 | 0.015 | 0.25 | - | - | 0.10 | 0.40 |
ASTM | GR.3 | 0.30 | 0.08 | 0.05 | 0.015 | 0.35 | - | - | 0.10 | 0.40 |
ASTM | GR4 | 0.50 | 0.08 | 0.05 | 0.015 | 0.40 | - | - | 0.10 | 0.40 |
Standard | Mark | Other Elements | ||||||||||||
Fe | C | N | H | O | Mo | Ni | Pa | Al | V | Single | combination | |||
ASTM | GR.5 | 0.30 | 0.08 | 0.05 | 0.015 | 0.20 | - | 5.5-6.75 | 3.5-4.5 | 0.10 | 0.40 | |||
ASTM | GR.7 | 0.30 | 0.08 | 0.03 | 0.015 | 0.25 | - | 0.12-0.25 | - | - | 0.10 | 0.40 | ||
ASTM | GR.9 | 0.25 | 0.08 | 0.03 | 0.015 | 0.15 | - | - | - | 2.5~3.5 | 2.3-3.0 | 0.10 | 0.40 | |
ASTM | GR.12 | 0.30 | 0.08 | 0.03 | 0.015 | 0.25 | 0.2-0.4 | 0.6-0.9 | - | - | 0.10 | 0.40 | ||
Mechanical behavior
Standard | Grade | tensile strength MPa | yield strength MPa | elongation % | reduction of area % | Note |
not less than | ||||||
ASTM | GR.1 | 240 | 170 | 24 | 30 | |
ASTM | GR.2 | 345 | 275 | 20 | 30 | |
ASTM | GR.3 | 450 | 380 | 18 | 30 | |
ASTM | GR.4 | 550 | 483 | 15 | 25 | |
ASTM | GR.5 | 895 | 828 | 10 | 25 | |
ASTM | GR.7 | 345 | 275 | 20 | 30 | |
ASTM | GR.12 | 483 | 345 | 18 | 25 | |
| (1) Round Target | |||||||
| Material | Type | Size | |||||
Ti Target Ni Target Zr Target Mo Target Ti-Al Target
| Round | Common:Dia100×40,Dia80×40,Dia60×40 According to Customers' Requirements | |||||
| (2)Plate Target | |||||||
| Material | Type | Size | |||||
Ti Target Ni Target Zr Target Mo Target Ti-Al Target
| Plate | According to Customers' Requirements | |||||
vacuum coating titanium target