Ads by Google
this universal charging and testing unit of accessory to fill the nitrogen for accumulator.there are three types for your choice.
model | nominalpressure(Mpa) | connection sizewith accumulator | matching accumulator | matching pressure gauge | tube size | weight(kg) | ||
scale range | class | inside diameter(mm)×num. layer of the wire | length(mm) | |||||
CQJ-16 | 16 | M14×1.5 | NXQ-*/10 | P=16 | 1.5 | D8×1 | 1000to2000 | 1.7 |
CQJ-25 | 25 | NXQ-*/20 | P=25 | D8×2 | 1.7 | |||
CQJ-40 | 40 | NXQ-*/31.5 | P=40 | D8×3 | 1.7 |
1.the charging and testing units are designed to charge,test gas pressure of nitrogen and the existed pre-charge pressure.
2.when the max pressure of accumulator charged is less than max pressure of nitrogen cylinder,relief valve is used to charge the accumulator.
3.note:after charging,the connector between nitrogen cylinder and accumulator should be closed,and then open the bleed valve of charging tool to exhaust completely the gas in hose,finally,unload the charging tool.
universal charging and testing unit,special designed