diamond cutting tools:
use of appropriate processing of single products are generally less than the total cost of the other tooling costs.
The basic use of superhard tool issues 1. the tool cutting edge to be processed products must be strictly adjusted to the center and center height is high, lower than the center of the cutting is strictly prohibited. 2.PCD tool main processing copper. aluminum. Zn. alloy and other non-ferrous metals and rubber. plastic. bakelite and so on. 3.PCBN main processing tool hardened steel. cast iron. Fe-based powder metallurgy of ferrous metals. 4.PCBN Cutter Steel Job Classes. workpiece hardness should be greater than HRC40 or more. 5.PCBN with negative rake angle tool, the positive rake angle and 0 ° rake angles, edges and corners by increasing the degree of reverse compensation. 6.PCD cutting tool depth of no more than 3 / 4 tip is appropriate. 7.PCD cutting available coolant. PCBN cutting coolant is not available, suitable for dry cutting.
diamond cutting tools