Ads by Google
1. Use the integrated circuit. The control procedure is simply and reliable. It's convenient to examine and failure rate is low.
2. Quick cutting speed, stable electric arc, small and smooth margin.
2. Not only to cut low-carbon steel, arbitrary shape of alloy steel, but also to cut aluminum alloy which oxyacetylene flame can't cut, like stainless steel, cast iron, ect.
ITEM | LGK-40 | LGK-63 | LGK-100 |
Power voltage/frequency | Three phases 380V±10% | Three phases 380V±10% | Three phases 380V±10% |
Rated input power(KVA) | 9.6 | 15 | 28 |
Rated input current(A) | 14 | 22 | 42 |
Rated duty cycle(%) | 60 | 60 | 60 |
Output current(A) | 40 | 63 | 100 |
Output no-load voltage(V) | 240 | 240 | 280 |
Operating voltage(V) | 96 | 105 | 120 |
Cutting thickness(mm) | 12 | 20 | 30 |
Air pressure(mpa) | 0.4-0.6 | 0.4-0.6 | 0.5-0.7 |
Gas flow(L/min) | 100 | 100 | 130 |
Net weight(kg) | 87 | 97 | 140 |
Gross weight(kg) | 100 | 110 | 155 |
Insulation class | F | F | F |
Crust protection class | IP21S | IP21S | IP21S |
Dimension(mm) | 382*760*660 | 382*760*660 | 440*760*660 |
LGK SERIES AIR PLASMA CUTTER