Design Features
1 . Modulated driving signal to ensure the safety of the solenoid of the CR pump
2 . Adjustable duty cycle for the driving signal
3 . Short circuit protection for the output circuitry of the solenoid driving signal
4 . Measure and LCD display rail pressure
5 .To test if the CR injector is still function, To connect a CR injector to a high pressure fuel
source by a high pressure fuel line and to the CR tester by harness. The tester is set to
continuous injection mode. The CR injector is in normal condition, if it is capable to inject
fuel under the driving signals by the tester.
6. To test injector spray atomization, To connect a CR injector to a high pressure fuel source
by a high pressure fuel line and to the CR tester by harness. The tester is set to single injection
mode to allow observing the nozzle spray pattern to judge if the nozzle is normal or orifice plugged.
7. Checking the Injectors return oil and injection oil.
Computer Screen Display.
Electrical supply 3 Phase 380V 50Hz. or 3phase 220v 50Hz
Common Rail Test Bench CRS200