Tile Surface Treatment Agent Tile base surface treatment: the base surface must be dense, dry, clean, no oil, dust Tile Surface Treatment AgentProduct short introduction:The enhancer is a modified polymer resin aqueous emulsion polymerization, and a special cement-based powder to form the two component materials, it can do the interface nap deal to tile mosaic, concrete, mortar.Substrate requirements: the substrate must be solid, clean free of oil or sludge and other pollution. Concrete substrate to be more than 28 days age, the back brick and cement mortar substrate materials to be more than 7 days age.Operation introduction:1,The base surface treatment:the base surface must be dense, dry, clean, no oil, dust and other pollution.2,when doing the mosaic tile surface nap or concrete interface treatment, according to liquid:powder=1:2, mix the products and use brush or roller to make the mixture on the substrate surface. After the drying, it can be used in the general construction. It can do the construction on the old tile surface.3,Paste and sealing: for marble, granite, and all kinds of tilesNotes:1.this product should do the construction between5°C~35°C 2.Do not do the construction in the rainy dayPackaging and storage: package:each group  inclouds 2 bags of  powder(20kg/bag)and 1barrel of  liquid (20kg/barrel). It should be stored in a cool, dry place, it can be stored for 6 months since the production date1.

Tile Surface Treatment/Enhancer Agent