1. PP/PET short fiber nonwoven geotextile 250gsm 2. PET continuous filament spunbond needle punched non woven geotextile Specifications 250gsm

1. PP/PET short fiber nonwoven geotextile 2. PET continuous filament spunbond needle punched non woven geotextile

1. PP/PET short fiber needle punched non woven geotextile.

2. PET continuous filament spunbond needle punched non woven geotextile

The product has the property of anti-aging, high strength, good flexibility and permeability, filtration, isolation and easy construction etc.It is widely used in areas of the railway, highway, sport venue,dyke,water project construction, tunnel,sea beach,inning...Packing size:Width:2-6m, Length:50-100m

Technical specification of shot fiber needle punched non woven geotextile:

No.	Item	Specification											Note
	Mass per square meter g/m2	100	150	200	250	300	350	400	450	500	600	800
1	Weight Variation %	-8	-8	-8	-8	-7	-7	-7	-7	-6	-6	-6
2	Thickness  mm ≥	0.9	1.3	1.7	2.1	2.4	2.7	3.0	3.3	3.6	4.1	5.0
3	Width Variation %	-0.5
4	Breaking Strength KN/m	2.5	4.5	6.5	8.0	9.5	11.0	12.5	14.0	16.0	19.0	25.0	MD and CD
5	Elongation at Break %	25 ~ 100
6	CBR Mullen Burst Strength KN≥	0.3	0.6	0.9	1.2	1.5	1.8	2.1	2.4	2.7	3.2	4.0
7	Sieve Size 090 mm	0.07 ~ 0.2
8	Vertical Permeability Coefficient cm/s	k× (0.1 ~ 0.001)											k=1.0-9.9
9	Tear Strength KN ≥	0.08	0.12	0.16	0.20	0.24	0.28	0.33	0.38	0.42	0.46	0.6	MD and CD
Needle punched geotextile after treatment method Singeing, Calendar,Heat-setting, the film cover,steep glue setting. Shell membrane surface treatment

1) Above targets data if the changes without notice.2) The fabric with single side singeing surface treatment if the client ask.

1).PET shot fiber needle punched nonwoven geotextile.

  

PET/PP needle punched nonwoven geotextile 250gsm