Ads by Google
reinforcing mesh welding machine
Introduction of the reinforcing mesh welding machine :
Line and cross wire are pre-straightened and cut to length.
Mesh welding lines for production of engineered fabric and special sheets, offering very short changeover times for most efficient production even of very small number of sheets. Processing of cold and hot rolled wires and bars.
Usage of the automatic wire mesh :
For fencing mesh which used for highway, railway and various function of protection. For construction which used for basis of high building, roof mesh, floor mesh. It is also widely used in agriculture and poultry mesh, farming mesh and so on.
Features of the reinforcing mesh welding machine :
1. All the pneumatic components used are with world famous brand. For European customers, it is very easy to get the parts locally.
2. PLC controlled. Easy to set and control. It makes this machine more intelligent and reasonable.
3. The greatest advantage is possible to adjust the distance of line wires at random on the same mesh panel.
4. The welding wire diameter is able to be made to orders. The range of our mesh welding machine is from 0.3mm to 12mm. Material can be stainless steel wire, galvanized wire, plain steel bar, cold rolled rebar, hot rolled rebar.
5. The machine line automatic degree can be according to request. For the economical type, line wire and cross wire are pre strengthened and cut to length. We capable to produce fully automatic machine.
Main parameters of the reinforcing mesh welding machine :
Wire mesh panel width | ≤3000mm |
Wire mesh panel length | Any length |
Wire diameter | φ3-φ8mm |
Line wire distance | 50-300mm |
Cross wire distance | >=50mm |
Welding speed | 60-120 rows /min |
Voltage | 380V 50Hz |
Compressed air | 0.8MPa 6m3 /min |
Wire material | Low carbon steel wire |
Wire surface status | Clean surface, steel wire or galvanized wire |
Wire wastage | 0% |
Reinforcing mesh welding machine