Welcome to ECVERY
Okay Energy Oxy-hydrogen Flame Enameled Wires Welding Machine
Okay Energy Oxy-hydrogen Flame Enameled Wires Welding Machine
Supplier Info
[China Supplier]
Contact Person : Mr. Zhou Jack
Tel : 86-731-13607311250
Fax : 86-731-84169262
Product Detail
Using the oxy-hydrogen flame which is produced by technology of water to fire welds enameled wires and leading-out wires.

In the production process of motor, we often use welding between enameled wires and leading-out wires. The traditional welding method is butt-welding or oxyacetylene welding.


Disadvantages of Butt-welding:

1.  The welding quanlity is not reliable, and welding parts are bad contact.

2.  Butt-welding requires eliminate the surface paint leather first.

3.  It can’t achieve butt-welding when several pieces enameled wires weld together.

4.  Butt-welding produces black smoke, it is harmful to evironment.

5.  Butt-welding produces electric arc, it is harmful to people eyes.


Disadvantages of Oxyacetylene welding:

1.       The high-pressure gas bottle is not safe with leakage and explosion danger.

2.       Acetylene combustion produces sulfide and carbide, it is harmful to people.

3.       Acetylene is expensive, welding cost is high.


Okay Energy Oxy-hydrogen Flame Enameled Wires Welding Machine adopts patented technology to electrolyze water to H2 and O2, then output the gas to welding torch through safe device, fire them to formed Oxy-hydrogen flame, weld enameled wires precisely and fast.


Advantages of Oxy-hydrogen Flame Enameled Wires Welding Machine:

1.  The gas used in welding is made according to the needs, turn on the machine to produce gas, supply gas with low pressure, shutdown the machine to stop producing gas, no gas storage, therefore, there is no danger about explosion. At the same time,the machine and welding torch both have built-in flashback arrestor device, it is 100% safe.

2.  The Flame material comes from water, after combustion it turns back to water again(invisible water vapour disappeare in air), there is no harm done to people and environment.

3.  Oxy-hydrogen flame temperature is higher up to 2800 degrees, it is concentrated and increased welding speed by 20%.

4.  It burns up the surface paint leather automatically, decreases the remove paint leather process before welding.

5.  The welding is reliable and stable.

6.  It is suitable for welding two pieces or several pieces different diameter enameled wires, the range of application is wide

Okay Energy Equipment Co.,Ltd is the first factory invented oxy-hydrogen Flame Enameled Wires Welding Machine. Our products have been using by more than five hundred enterprises worldwide. Most of them are listed company in domestic and overseas. Such as LEO, SEW motor (Germany) and so on.


Okay Energy Oxy-hydrogen Flame Enameled Wires Welding Machine

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.