Hot air rework station W.E.P 2009D 1.it is improved 2008D 2.It has three temperature storage segment 3.it it very light

Hot air Rework Station W.E.P 2009D

1.First memory segment defaults to 200oC , 5 seconds; 

2.Second memory segment defaults to 300oC , 17 seconds; 

3.Third memory segment defaults to 240oC , 12 seconds.

when was working  first temperature to 200 oC, and then work to maintain this temperature for 5 seconds, and then heated to 300oC , to maintain this temperature for 17 seconds of work, in the cooling to 240oC , to maintain this temperature for 17 seconds of work, after the completion of these three stages automatically into standby mode 

Features:

1. Comfortable portable handheld and microcomputer control temperature, LED display, big power, warming-up quickly, the temperature accuracy and stability, without the wind effect, the real lead-free soldering.

2. Intelligent digital operation, microcomputer software to 5 ‰ s real-time tracking tip temperature, the temperature especially stable.

3. Handle with sensor switch, Taking the handle, the system enter the working mode; handle released into the handle frame, the system will enter standby mode, real-time operating convenience.

4. Function tips and fault alarm. If parts, heater ,the circuit board failure and welding station which may burst failure signal, prompted the staff to check.

5. System with automatic cold air function, prolonged heating elements life and protect hot air gun.

6. Using the latest intelligent control program, according to the time needed to set the time (CH1.CH2.CH3 three keys can set three time ) required with the time and each time a different temperature settings to use.

7. Use brushless fan,with lowest noise and long lifetime; using high-quality heating element, in the same power efficiency can be doubled, which can effectively extend the service life of body heat and power savings. 8. Each time power is turned on, the handle should be (placed) in the handle of the frame, the machine can begin work. [If not (put) in the handle of the frame, the main unit can not detect safety instructions, so the machine does not work. ] The aim is to prevent misplacing or error on the handle due to unsafe or flammable place (work) and lead to adverse consequences. 9. Machine is small and take up a little work area.

10. Machine case use alloy materials,nice apprance and durable.

11. It is certificated ESD safe.

Technical datas:

Power consumption: 700w

Gun Temperature range: 100-480°C

Gun heater materical: Nickel alloys

Gun heater resistance: 74Ω

Gun type: Brushless Fan

Air flow: 120L/min

Inner box Dimension(cm): 26*16.5*14.8

Outer box Dimension(cm): 54*35*31

QTY: 8PCS/ctn

N.W.: 1.75KG/PCS

G.W.: 2.1KG/pcs

What's in the box:

* main unit + gun + power cord

* guide

* 3 nozzles

These are 220V units, you may need a transformer to use the machine in your country. we also do accept special orders for 110V  / 230V/ 240V units.

Product real display

Hot air Rework Station W.E.P 2009D