Welcome to ECVERY
ZT-15-200 Cable Accessories
ZT-15-200 Cable Accessories
Supplier Info
[China Supplier]
Contact Person : Mr. Adam John
Tel : 86-577-62621999
Fax : 86-577-62732105
Product Detail
Live monitor test points can be installed or failure indicator to query the device charged state and the malfunction.

15kV 200A plug cable connector is fully insulated, sealed can touch the plug-in terminal charged the first, widely used in outdoor distribution transformers, American box changed, ring cabinet, cable branch box, underground transformers, and other electric devices. Installed in the T-II cable head 200A of the outlet side, 200A rafts and American mother, single-pass variable box (or double-pass) and the load adapter tube fittings, etc.. Live monitor test points can be installed or failure indicator to query the device charged state and the malfunction. The use of high quality EPDM (ethylene propylene diene rubber) insulated, conductive rod connectors with arc material, it can operate in electric mode, but can not cut short-circuit current; can be used as load switches breaking current 200A. Applicable to 15kV cables cross-section 35 mm2 ~ 120 mm2 of cross-linked polyethylene

The main parameters       KV                  
Rated voltage15
Maximum phase voltage14.4
The maximum relative voltage8.3
1 minute power frequency withstand voltage42
15 minutes neglect.the53
Lightning shock pressure95
The minimum corona starting voltage11

1, insulation layer: The formula and unique hybrid technology to ensure high quality prefabricated EPDM rubber insulation quality 2, the operation ring: one molded part with a stainless steel spring clips fixed-point operation 3, the voltage test point: used to test whether the live line indicator needs and charged with 4, within the semi-conductive layer: conductive rubber EPDM pre-effective control of electrical stress 5, outside the semi-conductive layer: conductive EPDM rubber precast cable shield and the shield with the realization of continuous, and that outside in the ground state of semi-conductive layer 6, insert the rod arc: tinned copper rod with a conductive arc function, with the knife provided with the box wrench to screw into the form of conductive connector 7, compression terminals: cable material according to the different choice of copper or copper and aluminum crimp crimp

ZT-15-200 Cable Accessories

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.